WOODMAN VP series ensures to accurately and firmly bond veneer edges with no visible joint line.

 Complied with European CE safety standards

 Precise cooling system for prolonging glue pot life

 Rigid welded machine body for stable splicing work

 Easy adjustment and quick access of integrated gluing system

 Special-designed pressurized and heating mechanical structures

 Motorized driven infeed discs instead of traditional rollers for smoother infeed

 Splicing up to 5 mm pre-glued veneers with manual gluing by proper adjustment

 The latest designed transporting chains of engineering plastics for reducing the heat on veneers

 Reflective photocell sensor in the infeed section to ensure a perfect alignment of the jointed veneers

 Narrow heating zone with individual temperature controllers for minimizing the heat to avoid deforming splicing veneers

 SSR (solid state relay) heating controller, different from the heater with traditional magnetic contactor, for more accurate temperature control and longer life without sparks of contacts

 Infeed stopper device available for smoother feeding of thick veneers above 1.2 mm (option)



Veneer Strip Thickness
(depending on veneer condition)

approx. 0.35 ~ 1.5 mm                                            
(the optional infeed stopper device is recommended for veneers above 1.2 mm)

Veneer Strip Length

min. 350 mm

Veneer Strip Width

min. 45 mm

Production Speed

up to 45 m/min.

Electric Power

approx. 5.5 kw

Compressed Air

5 bar

Heating Temperature

100 ~ 220 °C

Heating Zone

1200 mm

Dimensions  (L x W x H)

2190 x 2070 x 1590 mm

Net Weight

approx. 1500 kg


RAL 7043 / RAL 9016