WOODMAN Oscillating vertical spindle sander
Floor mounted spindle sander with 10 bobbins ranging from 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3" & 4'', table size 600x600mm/tilting to 45° ...
The rubber drum can be fitted on both ends to fully utilize the entire spindle.
The oscillating sanding provides an extremely fine sanding finish.
Ten sanding drums can be accommodated.
Easily interchanged spindles.
The tilting table is precision ground.
Heavy gauge steel frame.
Dust hood: A dust hood is built under the table for connection to dust collector. The dust hood outlet is 4" diameter.
Easy spindle interchange: This machine accommodates ten sizes of spindle from 1/4" to 4", diameter to fit the various rubber drum diameters. Spindle changes is easily made by using the supplied wrench.
Tilting table: The tilting table can be easily tilted by loosening the two lock knobs located at both sides under the table for the sanding of bevelled parts. A graduated scale is attached to read the tilting degree.
Model | SA-390JM |
Speed | 1725RPM |
Oscillations per minute | 75 |
Length of oscillation | 1-1/2" |
Table size | 24"x24" |
Table tilt | 0°~45° |
Table height from floor | 950mm/37.4" |
Motor | 1HP |
Net weight | 137kg |
Gross weight | 145kg |
Packing dimensions | 27"x27"x46" |