MCL 46/56 series (460/560mm)
High Speed Precision Lathes, heavy duty spindle and CSS (constant surface speed control) on request for E.V.S. model.
All castings are properly stabilized and stress relieved.
Bed ways are hardened & ground to min. HS-70.
Turcite B coating between the bed and carriage.
Extremely low noise level.
Foot brake pedal provided.
Built-in coolant pump & fitting provided.
CSS (constant surface speed control) on request for E.V.S. model
Wider bed way which absorbs vibration.
Conventional Lathe | |||||||||||||||
MODEL | MCL-46xxx | MCL-56xxx | MCL-46xxxV | MCL-56xxxV | |||||||||||
100 | 150 | 200 | 100 | 150 | 200 | 300 | 100 | 150 | 200 | 100 | 150 | 200 | 300 | ||
Capacity | Height of centers | 230 mm (9.055") | 271 mm (10.67") | 230 mm (9.055") | 271 mm (10.67") | ||||||||||
Swing over bed | Ø460 mm (18.11") | Ø560 mm (22.04") | Ø460 mm (18.11") | Ø560 mm (22.04") | |||||||||||
Swing in gap | Ø710 mm (27.95") | Ø808 mm (31.81") | Ø710 mm (27.95") | Ø790 mm (31.10") | |||||||||||
Swing over cross slide | Ø280 mm (11.02") | Ø390 mm (15.35") | Ø280 mm (11.02") | Ø390 mm (15.35") | |||||||||||
Distance between centers | 1000 mm (40") | 1500 mm (60") | 2000 mm (80") | 1000 mm (40") | 1500 mm (60") | 2000 mm (80") | 3000 mm (120") | 1000 mm (40") | 1500 mm (60") | 2000 mm (80") | 1000 mm (40") | 1500 mm (60") | 2000 mm (80") | 3000 mm (120") | |
Width of bed | 345 mm (13.58") | ||||||||||||||
Gap width in front of faceplate | 250 mm (9.84") | ||||||||||||||
Headstock and Main Spindle | Spindle nose, internal taper | D1-8, MT.No.7 | |||||||||||||
Spindle center sleeve | MT. No.7 x MT. No.5 | ||||||||||||||
Spindle bore | Ø80 mm (3.149") | ||||||||||||||
Spindle speed: Gear steps / Range | 16 steps / 20~1600 R.P.M. | 4 steps / | |||||||||||||
Carriage | Length on bed / Width of carriage | 543 mm (21.37") / 542 mm (21.33") | |||||||||||||
Cross slide travel | 272 mm (10.7") | ||||||||||||||
Top slide travel | 137 mm (5.39") | ||||||||||||||
Threads and Feeds | Whitworth threads: Kinds / Range | 38 Kinds / 2~72 T.P.I. | |||||||||||||
Metric threads: Kinds / Range | 40 Kinds / 0.4~14 mm | ||||||||||||||
D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | ||||||||||||||
M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | ||||||||||||||
Longitudinal feeds | 0.04~1.0 mm (0.0015"~0.04") | ||||||||||||||
Cross feeds | 0.02~0.5 mm (0.00075"~0.02") | ||||||||||||||
Tailstock | Quill diameter | Ø76 mm (3") | |||||||||||||
Quill travel | 165 mm (6.5") | ||||||||||||||
Taper of center | MT.No.5 | ||||||||||||||
Motor | Main spindle | 10HP | 12.5HP | AC 9.375kW (12.5HP), lnverter | |||||||||||
Forced lubrication for HD. | No | 1/4HP | |||||||||||||
Coolant pump | 1/8HP | ||||||||||||||