ML Series (435/508MM)
High Speed Precision Lathes, turcite B coating between the bed and carriage. Built-in coolant pump & fitting provided.
All castings are properly stabilized and stress relieved.
Bed ways are hardened & ground to min. HS-70.
Turcite B coating between the bed and carriage.
Extremely low noise level.
Foot brake pedal provided.
Built-in coolant pump & fitting provided.
CSS (constant surface speed control) on request for E.V.S. model
Wider bed way which give absorbs vibration.
Conventionl Lathe | |||||||||
ML-1740 | ML-2040 | ML-1740V | ML-2040V | ||||||
ML-1760 | ML-2060 | ML-1760V | ML-2060V | ||||||
Capacity | Height of centers | 216 mm (8.5") | 254 mm (10") | 216 mm (8.5") | 254 mm (10") | ||||
| Swing over bed | Ø435 mm (17") | Ø508 mm (20") | Ø435 mm (17") | Ø508 mm (20") | ||||
| Swing in gap | Ø622 mm (24.48") | Ø698 mm (27.48") | Ø622 mm (24.48") | Ø698 mm (27.48") | ||||
| Swing over cross slide | Ø277 mm (10.9") | Ø353 mm (13.89") | Ø277 mm (10.9") | Ø353 mm (13.89") | ||||
| Distance between centers | 1000 mm (40") | 1500 mm (60") | 1000 mm (40") | 1500 mm (60") | 1000 mm (40") | 1500 mm (60") | 1000 mm (40") | 1500 mm (60") |
| Width of bed | 305 mm (12") | |||||||
| Gap width in front of faceplate | 195 mm (7.67") | |||||||
Headstock and | Spindle nose, internal taper | D1-6, Ø85 mm Taper 1/19.18 | |||||||
| Spindle center sleeve | Ø85 mm Taper 1/19.18 x MT. No.5 | |||||||
| Spindle bore | Ø80 mm (3.149") | |||||||
| Spindle speed: Gear steps | 12 steps / 36~1800 R.P.M. | 3 steps / | ||||||
Carriage | Length on bed / Width of carriage | 440 mm (17.32") / 477 mm (18.77") | |||||||
| Cross slide travel | 235 mm (9.25") | 272 mm (10.7") | 235 mm (9.25") | 272 mm (10.7") | ||||
| Top slide travel | 160 mm (6.3") | |||||||
Threads and Feeds | Whitworth threads: Kinds / Range | 45 Kinds / 2~72 T.P.I. | |||||||
| Metric threads: Kinds / Range | 39 Kinds / 0.2~14 mm | |||||||
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | |||||||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | |||||||
| Longitudinal feeds | 0.04~1.0 mm (0.0015"~0.04") | |||||||
| Cross feeds | 0.02~0.5 mm (0.00075"~0.02") | |||||||
Tailstock | Quill diameter | Ø59 mm (2.322") | |||||||
| Quill travel | 127 mm (5") | |||||||
| Taper of center | MT.No.4 | |||||||
Motor | Main spindle | 7.5HP | AC 5.5kW (7.5HP), lnverter | ||||||
| Forced lubrication for HD. | -- | 1/4HP | ||||||
| Coolant pump | 1/8HP | |||||||