Square Type 4F End Mills 45° - Stub Length
XA Coating - surface hardness 3300 HV, coefficient of friction 0.35 - 0.4, max. service temp. 1100°C
Ultrafine micro grain carbide
Ideal for cutting hard metals up to 70 HRC
Other grades available for cutting materials with lower hardness
Item No.: IS70A-14454T (4 Flutes)
Unit: mm
CED | CEL | OAL | Neck Diam. | Effective Length | Shank Diam. | Teeth |
1 | 1 | 50 | 0.95 | 3 | 4 | 4 |
1.5 | 1.5 | 1.45 | 4 | |||
2 | 2 | 1.94 | 6 | |||
3 | 3 | 2.94 | 8 | |||
4 | 4 | 3.9 | 12 | |||
1 | 1 | 50 | 0.95 | 3 | 6 | 4 |
2 | 2 | 1.94 | 5 | |||
3 | 3 | 2.94 | 8 | |||
4 | 4 | 3.9 | 12 | |||
5 | 5 | 4.8 | 15 | |||
6 | 6 | 5.8 | 16 | |||
7 | 7 | 60 | 6.6 | 16 | 8 | 4 |
8 | 8 | 7.6 | 20 | |||
9 | 9 | 75 | 8.6 | 20 | 10 | 4 |
10 | 10 | 9.6 | 30 | |||
12 | 12 | 11.4 | 32 | 12 | ||
14 | 14 | 100 | 13.4 | 45 | 16 | 4 |
16 | 16 | 15.4 | 45 | |||
18 | 18 | 17 | 45 | 20 | ||
20 | 20 | 19 | 45 |
CED | TOLERANCE |
Ø<1 | -0 ~ -0.015 |
1<Ø<3 | -0 ~ -0.02 |
3<Ø<12 | -0 ~ -0.025 |
12<Ø | -0 ~ -0.03 |