Casting structure assures machanical strength.
Fully adjustable hydraulic downfeed controls the rate of descent
Full blade cover provides more safety.
4 steps belt speeds allows different cutting speed.
Bearing carbide guide enhances cutting stability and extends the blade life.
Cutting angle from 0 degree to 45 degree.
Stand jointed with water pan for collecting chip and water
Coolant system for wet cutting.
With standard blade, chip brush and length stop set
Wheel kit for convenient moving to various work stations
RF-812N | ||
CUTTING CAPACITY | ||
0° | Round | 200 mm ( 7" ) |
Square | 200 x 200 mm (7 7/8”x7 7/8”) | |
Rectangle | 178 x 305 mm (7”x12”) | |
±45° | Round | 127 mm ( 5" ) |
Square | 120 x 120 mm (4 5/8”x4 5/8”) | |
Rectangle | 120 x 125 mm (4 5/8”x4 7/8”) |
Specifications | |
Motor | 1HP |
| 1Phase/3Phase |
Voltage | Mt/min 60HZ / 29-50-75-100 50HZ / 24-41-61-82 |
| Ft/min 60HZ / 98-164-246-328 50HZ / 81-134-203-270 |
Cutting capacity | mm W x T x L / 19.05 x 0.8 x 2362 W/carbon blade |
| inch W x T x L / 0.75 x 0.0315 x 93 |
Machine size | mm L x W x H / 1235 x 430 x 1100 |
| inch L x W x H / 49 x 17 x 43 |
Machine weight | kg 180/200 |
| lbs 395/440 |
Packaging size | mm L x W x H / 1283 x 483 x 1143 |
| inch L x W x H / 51 x 19 x 45 |