POWERED LOG TURN-OVER: The log turn-over is easily made by operating a lever to select the optimum cutting direction.
TOP AND BOTTOM SAW CONFIGURATION: This provides big cutting capacity of thickness. Positioning is controlled by a digital controller combined with a linear motion guide for accurate setting and cutting.
CUTTING OUT SQUARE WOOD: The machine performs trimming operations for the right and left side at the same time.
CONTROL PANEL: Amp meter for each saw head shows load percentage of motor. Width of cut can be manually adjusted by a shifting lever or set by the digital controller.
Max. cutting capacity for log diameters up to Ø400mm.
For trimming and sizing logs at the same time.
Digital controller and linear motion guides.
Variable chain conveyor feed speed, ideal for cutting soft and hard materials.
Top and bottom saw configuration on both sides allows for simultaneous cutting of both sides.
High horsepower drive on each saw head provides heavy duty cutting capability.
Stock infeed port (W×H)
Ø400 × 400mm
Maximum diameter of cut
Minimum diameter of cut
Feed speed (variable)
Saw arbor diameter
Log rolling motor
Top & bottom saw drive motor
25HP × 2, 30HP × 2
Upper dust hood outlet diameter
Ø6" × 2
Lower dust hood outlet diameter
Ø6" × 2
Saw adjustment brake motor
Machine dimensions (L×W×H)
7000 × 2125 × 2020mm
WOODMAN 400mm Sawmilling
The log turn-over is easily made by operating a lever to select the optimum cutting direction.
A necessity in furniture factories.