WOODMAN UM Series

Designed for glue-spliced joint for long and panel-sized veneer faces, a full set of veneer splicing line is completed.


 Infeed guides for veneer jointing alignment

 Air cleaning system for photoelectric sensors

 Safety guard of light curtain with European CE safety standards

 Hydraulic driven clipper for the pre-selected width of veneer faces

 Fix-length (cut-to-size) and endless (fix-jointed) splicing modes offered

 Veneers with the thinness as low as 0.2 mm spliced (certain species of veneers)

 Pre-feeding stopper system to avoid mismatching in the beginning of feeding stage

 Independent cylinders for pack beam pressure for thin veneers splicing even possible with extremely thin veneers

 “Clear-and-easy” operation control panel with user-friendly PLC based interface touch screen for the best production output

 Remote monitoring maintenance system for faster access in case of machine breakdown (option)

 In case of machine breakdown, our service personnel can check customers’ PLC program via the internet so as to solve the problem in time.

 Veneer faces trimming and reinforcing machine (option)

 Operators adjust the width of trimming heads to fit the size of veneer faces as their requirement. This machine tapes veneer sheets up with paper and simultaneously cut off the waste as the final step. The device effectively keeps the edges of veneer faces from splitting with tapes while being transported.

 Automatic stacker for stacking veneer sheets (option)

 The jointed veneer faces will be transported onto this automatic stacker. With specially designed stacker, jointed veneer faces are then placed well on the top of scissor lifting table for next movement.

 Scissor lifting table (option)

 With the hydraulic scissor lifting table at the end of the automatic stacker for stacking jointed veneers, veneer faces are then settle well for stacking efficiency enhancement.


Model

UM-51343

UM-51113

UM-5833

UM-5603

Veneer Strip Length

350 ~ 3400 mm

350 ~ 2800 mm

350 ~ 2100 mm

350 ~ 2100 mm

Veneer Strip Thickness

0.25 ~ 1.5 mm

(0.35 ~ 3.5 mm for UltiMate S series)

0.25 ~ 1.5 mm

(0.35 ~ 3.5 mm for UltiMate S series)

0.25 ~ 1.5 mm

(0.35 ~ 3.5 mm for UltiMate S series)

0.25 ~ 1.5 mm

(0.35 ~ 3.5 mm for UltiMate S series)

Veneer Strip Width

min. 75 mm

min. 75 mm

min. 75 mm

min. 75 mm

Production Speed

15 ~ 20 cycles/min.

15 ~ 20 cycles/min.

15 ~ 20 cycles/min.

15 ~ 20 cycles/min.

Electric Power

approx. 28 kw

approx. 23 kw

approx. 19 kw

approx. 16 kw

Compressed Air

5 bar

5 bar

5 bar

5 bar

Dimensions (L x W x H)

4800 x 1600 x 1800 mm

4200 x 1600 x 1800 mm

3500 x 1600 x 1800 mm

2900 x 1300 x 1800 mm

Net Weight

approx. 6200 kg

approx. 5300 kg

approx. 4400 kg

approx. 3300 kg

Color

RAL 7043 / RAL 9016

RAL 7043 / RAL 9016

RAL 7043 / RAL 9016

RAL 7043 / RAL 9016