WOODMAN Manual Finger Jointing System
This entry level manual finger jointing system is competitively priced and ideal for low to medium volume production.
WOODMAN Manual Finger Jointing System FJ-915
Easy to operate and requires very little maintenance
Performs horizontal or vertical jointing up to 6 inches
Wide range of working dimensions, jointing blocks as short as 4.5"
Spirally stacked carbide tipped cutters offer easy setup, smooth cutting, and eliminate rip-out, tear-out and vibration.
Low Volume System: FJ-915A = F-9C51 + F-9G01 + F-9A07
Medium Volume System: FJ-915B = F-9C51 + F-9C52 + F-9G01 + F-9A07
Finger ShaperModel | F-9C51 (Left) / F-9C52 (Right) |
Max. table working width | 450 mm |
Range of workpiece length | 115 - 1000 mm |
Range of workpiece width | 25 - 160 mm |
Trimming saw motor | 5HP (3ph), 5HP (1ph) |
Shaper cutter motor | 10HP (3ph), 7 1/2HP (1ph) |
Dust outlet diameter | 6" x 1, 4" x 2 |
Machine dimensions ( LxWxH ) | 1780 x 840 x 1400 mm |
Gluing UnitModel | F-9G01 |
Max. workpiece width | 152 mm |
Power requirement | 1/8 HP (3ph), 1/8 HP (1ph) |
Overall dimension ( LxWxH ) | 610 x 420 x 840 mm |
Assemble PressModel | F-9A07 |
Max. working length | 4500 mm |
Max. working thickness | 60 mm |
Max. working width | 160 mm |
Max. assembly pressure | 0 - 100 kg/cm2 |
Hydraulic power unit | 5 HP (3ph), 3 HP (1ph) |
Cut-off saw motor | 5HP (3ph), 5 HP (1ph) |
Machine dimensions( LxWxH ) | 6650 x 950 x 1400 mm |