BHL Series (387MM)

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

Conventionl Lathe
MODEL BHL-1550 BHL-1550V
Capacity Height of centers 190 mm (7.48")
Swing over bed Ø387 mm (15.23")
Swing in gap Ø610 mm (24")
Swing over cross slide Ø238 mm (9.37")
Distance between centers 1250 mm (50")
Width of bed 280 mm (11")
Gap width in front of faceplate 265mm (10.43")
Headstock and
Main Spindle		 Spindle nose, internal taper D1-6, MT.No.6
Spindle center sleeve MT. No.6 x MT. No.4
Spindle bore Ø56 mm (2.2")

Headstock and
Main Spindle
Spindle speed: Gear steps
/
Range		 16 steps / 25~2000 R.P.M.
Green 20 80 260 840
Yellow 33 108 350 1120
Red 45 140 470 1500
Blue 60 190 625 2000
"MATRIX" Disc clutch for Forward / Reverse
4 steps /
L 22~72 R.P.M.
M 70~235 R.P.M.
MH 235~780 R.P.M.
H 753~2500 R.P.M.
Carriage CarriageLength on bed / Width of carriage 484 mm (19.05") / 450 mm (17.71")
Cross slide travel 235 mm (9.25")
Top slide travel 120 mm (4.72")
Threads and Feeds Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter Ø59 mm (2.322")
Quill travel 127 mm (5")
Taper of center MT.No.4
Motor Main spindle 7.5HP AC 5.5kW (7.5HP), lnverter
Forced lubrication for HD. -- 1/4HP
Coolant pump 1/8HP

Conventional Lathe

Metalworking

Conventional Lathe

Recently Viewed