MCL 46/56 series (460/560mm)
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HS-70.
- Turcite B coating between the bed and carriage.
- Extremely low noise level.
- Foot brake pedal provided.
- Built-in coolant pump & fitting provided.
- CSS (constant surface speed control) on request for E.V.S. model
- Wider bed way which absorbs vibration.
Conventional Lathe |
MODEL |
MCL-46xxx |
MCL-56xxx |
MCL-46xxxV |
MCL-56xxxV |
100 |
150 |
200 |
100 |
150 |
200 |
300 |
100 |
150 |
200 |
100 |
150 |
200 |
300 |
Capacity |
Height of centers |
230 mm (9.055") |
271 mm (10.67") |
230 mm (9.055") |
271 mm (10.67") |
Swing over bed |
Ø460 mm (18.11") |
Ø560 mm (22.04") |
Ø460 mm (18.11") |
Ø560 mm (22.04") |
Swing in gap |
Ø710 mm (27.95") |
Ø808 mm (31.81") |
Ø710 mm (27.95") |
Ø790 mm (31.10") |
Swing over cross slide |
Ø280 mm (11.02") |
Ø390 mm (15.35") |
Ø280 mm (11.02") |
Ø390 mm (15.35") |
Distance between centers |
1000 mm (40") |
1500 mm (60") |
2000 mm (80") |
1000 mm (40") |
1500 mm (60") |
2000 mm (80") |
3000 mm (120") |
1000 mm (40") |
1500 mm (60") |
2000 mm (80") |
1000 mm (40") |
1500 mm (60") |
2000 mm (80") |
3000 mm (120") |
Width of bed |
345 mm (13.58") |
Gap width in front of faceplate |
250 mm (9.84") |
Headstock and Main Spindle |
Spindle nose, internal taper |
D1-8, MT.No.7 |
Spindle center sleeve |
MT. No.7 x MT. No.5 |
Spindle bore |
Ø80 mm (3.149") |
Spindle speed: Gear steps / Range |
16 steps / 20~1600 R.P.M.
Green 20 65 210 670
Yellow 25 85 280 900
Red 35 115 380 1200
Blue 50 150 500 1600
Disc clutch for Forward / Reverse |
4 steps /
L 18~55 R.P.M.
M 55~180 R.P.M.
MH 180~600 R.P.M.
H 600~1800 R.P.M.
Infinitely variable |
Carriage |
Length on bed / Width of carriage |
543 mm (21.37") / 542 mm (21.33") |
Cross slide travel |
272 mm (10.7") |
Top slide travel |
137 mm (5.39") |
Threads and Feeds |
Whitworth threads: Kinds / Range |
38 Kinds / 2~72 T.P.I. |
Metric threads: Kinds / Range |
40 Kinds / 0.4~14 mm |
D.P. threads: Kinds / Range |
21 Kinds / 8~44 D.P. |
M.P. threads: Kinds / Range |
18 Kinds / 0.3~3.5 M.P. |
Longitudinal feeds |
0.04~1.0 mm (0.0015"~0.04") |
Cross feeds |
0.02~0.5 mm (0.00075"~0.02") |
Tailstock |
Quill diameter |
Ø76 mm (3") |
Quill travel |
165 mm (6.5") |
Taper of center |
MT.No.5 |
Motor |
Main spindle |
10HP |
12.5HP |
AC 9.375kW (12.5HP), lnverter |
Forced lubrication for HD. |
No |
1/4HP |
Coolant pump |
1/8HP |
Metalworking
Conventional Lathe
Recently Viewed