RFM-3VS

- Equipped with cooling system.
- Slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
- All castings are FC25 high quality material, anneal treated to relieve internal stress.
- Oversize column ensures maximum rigidity and stability widely spaced base structure.
- Centralized contral panel minimizes operation fatigue while permitting efficient operation.
- Rugged Saddle
- The spindle runs on precision bearings for long term high speed running, heavy duty cutting and maximum stability.
- The X and Y axes are transmitted by precision screws. Combined with preloaded double nuts for extremely smooth ,high precision working and minimum backlash.
- The gears are hardened and precision ground.
- Belt drive milling head.
- Milling Head can tilts 90 degree right and left; 45 degree back and forward.
- Feed change with inverter for variable speed change which design is easy to change speed. (For 3EVS)
- Machine bad, stand and table are made by MEEHANITE Cast Iron construction.
- Automotic Lubrication System is optional.
- Table Power Feed for X, Y axis are optional equipment.
Specifications: |
RFM-3VS |
Drilling Capacity in Cast Iron |
OD-18mm |
Drilling Capacity in Steel |
OD-15mm |
Capacity face milling |
OD-75mm/2.5mm |
Capacity end milling |
OD-20mm/6mm |
Spindle Taper |
R8/NT- 30 |
Diameter of Quill |
85mm |
Number of Spindle Speeds |
Variable |
Range of Spindle Speeds (50HZ) |
0-4,500 rpm |
Range of Spindle Speeds (60HZ) |
0-4,500 rpm |
Power Down Feed per Revolutions of Spindle |
0.04/0.08/0.15mm/rev. |
Number of Power Feeds |
3 |
Spindle Travel |
127mm |
Head Movement (L to R) |
90 degrees |
Head Tilt |
45 degrees |
Max. Distance Spindle to Table |
50-400mm |
Max. Distance Spindle to Column |
630mm |
Min. Distance Spindle to Column |
250mm |
Collet Capacity |
3mm-16mm |
Size of Table |
252mmx1115mm |
Longitudinal Table Travel / X-Axis |
600mm |
Cross Table Travel / Y-Axis |
380mm |
Number of T-Slots |
3 |
T-Slot Size |
16mm |
T-Slot Centers |
64mm |
Max. Weight of Workpiece |
380kg |
Travel of Knee |
406mm |
Overarm Travel |
320mm |
Overall Dimensions Wx Dx H |
1570x1560x2200mm |
Horse Power for Main Motor |
2.2kw (3HP) |
Shipping Weight (approx.) |
1262kg |
Metalworking
Milling Machines
Recently Viewed