WOODMAN 400mm Sawmilling

POWERED LOG TURN-OVER: The log turn-over is easily made by operating a lever to select the optimum cutting direction.
TOP AND BOTTOM SAW CONFIGURATION: This provides big cutting capacity of thickness. Positioning is controlled by a digital controller combined with a linear motion guide for accurate setting and cutting.
CUTTING OUT SQUARE WOOD: The machine performs trimming operations for the right and left side at the same time.
CONTROL PANEL: Amp meter for each saw head shows load percentage of motor. Width of cut can be manually adjusted by a shifting lever or set by the digital controller.
Max. cutting capacity for log diameters up to Ø400mm.
For trimming and sizing logs at the same time.
Digital controller and linear motion guides.
Variable chain conveyor feed speed, ideal for cutting soft and hard materials.
Top and bottom saw configuration on both sides allows for simultaneous cutting of both sides.
High horsepower drive on each saw head provides heavy duty cutting capability.

Model	SM-5400
Stock infeed port (W×H)	Ø400 × 400mm
Maximum diameter of cut	Ø400mm
Minimum diameter of cut	Ø110mm
Feed speed (variable)	6-24M/min.
Sawblade diameter	Ø505mm (20")
Saw arbor diameter	Ø40mm
Log rolling motor	¼HP
Feed motor	3HP
Top & bottom saw drive motor	25HP × 2, 30HP × 2
Upper dust hood outlet diameter	Ø6" × 2
Lower dust hood outlet diameter	Ø6" × 2
Air pressure	4-6 Kg/cm2
Saw adjustment brake motor	1HP
Machine dimensions (L×W×H)	7000 × 2125 × 2020mm
Net weight	(approx) 3900kg
Gross weight	(approx) 4800kg