CNL Series (435MM)

  • Headstock bearings and gears are supplied with oil delivered by a pump attached to take on the rear plinth.
  • A distributor within the headstock supplies oil to the drive bearings and gears.
MODEL CNL-1740 CNL-1760
capacity No. of control axis 2 AXIS
Swing over bed Ø435 mm (17.12")
STD. D1-6 distance between centers 950 mm (37.40") 1450 mm (57.08")
STD. D1-6Max. working length 4 way tool post 800 mm (31.50") 1300 mm (51.18")
Hyd. P8 turret 650 mm (25.59") 1150 mm (45.27")
Max. working dia. 4 way tool post 230 mm (9.0")
Hyd. P8 turret 220 mm (8.66")
Width of bed 305 mm (12") 305 mm (12")
Headstock
and Main Spindle
Spindle nose, internal taper STD. D1-6, MT No.6 OPT. A1-6, MT. No.6
Spindle bore STD. Ø52.5 mm (2.066") OPT. Ø51 mm (2")
Spindle speed: Gear steps /Range Pneumatic change 2 steps /
Infinitely variable
L 30~450 R.P.M.
= = = = = = = = =
H 451~2800 R.P.M.
Cross Slide (X-axis)  and Carriage (Z-axis) Cross slide travel ( X-axis ) STD. 230 mm (9.05")
Longitudinal travel ( Z-axis ) STD. 900 mm (35.43") 1400 mm (55.11")
AC servo motor ( X-axis ) 0.85 kW 5.39 N.m
AC servo motor ( Z-axis ) 1.3 kW 8.34 N.m
Dia. of ball screw ( X-axis) Ø20 mm (0.787") P5 C5
Dia. of ball screw ( Z-axis ) Ø40 mm (1.57") P10 C5
Rapid traverse speed ( X-axis ) 5 m/min (196.8 ipm)
Rapid traverse speed ( Z-axis ) 7.5 m/min (295.3 ipm)
Turret Tool station STD. Manual 4 way tool
post
□20 mm
|
|
OPT. Elec H4
□20 mm
or
|
Hydraulic P8
□20 mm
Ø20 mm (0.787")
Size of external turning tool
Boring bar diameter
Tailstock Quill diameter Ø68 mm (2.677")
Quill travel 153 mm (6")
Taper of center MT.No.4
Motor Main spindle Inverter Motor AC 5.5kW ( 7.5HP ), Inverter ( 10HP )
Hydraulic oil pump OPT. 0.75 kW (1 HP) OPT. 1.5kW (2 HP)
Forced lubrication for headstock 1 / 4 HP
Coolant pump 1 / 6 HP
Tank Capacity Hydraulic tank OPT. 25 Liter (5.5 gal) OPT. 40 Liter (8.8 gal)
Coolant tank 60 L (13.2 gal.) 85 L (18.7 gal.)

CNC Lathe

Metalworking

CNC Lathe

Recently Viewed