CML Series (533MM)

MODEL CML-2040 CML-2060 CML-2080
Capacity No. of control axis 2 AXIS
Swing over bed Ø533 mm (20.98")
STD. D1-6 distance between centers 845 mm (33.27") 1345 mm (52.95") 1845 mm (72.64")
STD. D1-6Max. working length 4 way tool post 620 mm (24.41") 1120 mm (44.09") 1620 mm (63.78")
Hyd. P8 turret 530 mm (20.87") 1030 mm (40.55") 1530 mm (60.24")
Max. working dia. Ø305 mm (12")
Width of bed 345 mm (13.58")
Headstock
and Main Spindle		 Spindle nose, internal taper STD. D1-8 OPT. A2-8, Ø85 mm Taper 1/19.18
Spindle bore Ø80 mm (3.149")
Spindle speed Gear Steps / Range Manual change 4 steps /
Infinitely variable
SECTION 1 20~60 R.P.M.
SECTION 2 61~200 R.P.M
SECTION 3 201~670 R.P.M
SECTION 4 671~2000 R.P.M
Cross Slide (X-axis) and Carriage (Z-axis) Cross slide travel ( X-axis ) 300 mm (11.8")
Longitudinal travel ( Z-axis ) STD. 720 mm (28.3") 1220 mm (48.0") 1720 mm (67.7")
AC servo motor ( X-axis ) 1.3 kW 8.34 N.m
AC servo motor ( Z-axis ) 1.8 kW 11.5 N.m
Dia. of ball screw ( X-axis) Ø25 mm (0.98") P5 C5
Dia. of ball screw ( Z-axis ) Ø50 mm (1.97") P10 C5
Rapid traverse speed ( X-axis ) 5 m/min (196.8 ipm)
Rapid traverse speed ( Z-axis ) 7.5 m/min (295.3 ipm)
Turret Tool station STD. Manual 4 way tool post
□25 mm
|
|
Hydraulic P8
□20 mm
Ø20 mm (0.787")
Size of external turning tool
Boring bar diameter
Tailstock Quill diameter Ø85 mm (3.346")
Quill travel 178 mm (7")
Taper of center MT.No.5
Motor Main spindle motor Inverter Motor AC 7.5 kW (10 HP), Inverter (15 HP)
Hydraulic oil pump OPT. 0.75 kW (1HP) OPT. 1.75 kW (2HP)
Forced lubrication for headstock  1 / 4 HP
Automatic gear shift OPT. 60 W
Coolant pump 1/6 HP
Tank Capacity Hydraulic tank OPT. 25 Liter (5.5 gal.)   OPT. 40 Liter (8.8 gal.)
Coolant tank 60 L (13.2 gal.) 120 L (26.4 gal.) 180 L (39.6 gal.)

CNC Lathe

Metalworking

CNC Lathe

Recently Viewed