ERL Series (340MM)

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.
Conventional Lathe
  ERL-1330 ERL-1340 ERL-1330V ERL-1340V
Capacity Height of centers 171 mm (6.73")
Swing over bed Ø340 mm (13.38")
Swing in gap Ø512 mm (20")Not available for ERL-1330
Swing over cross slide Ø210 mm (8.26")
Distance between centers 760 mm (30") 1000 mm (40") 760 mm (30") 1000 mm (40")
Width of bed 230 mm (9")
Gap width in front of faceplate 150 mm (5")
Headstock and
Main Spindle		 Spindle nose, internal taper D1-4, MT. No.5
Spindle center sleeve MT. No.5 x MT. No.3
Spindle bore Ø40 mm (1.57")
Spindle speed: Gear steps
/
Range		 8 steps
4P
OPT
/ 80~2000 R.P.M.
16 steps
2P / 4P /
4P 50~1305 R.P.M.
2P 100~2570 R.P.M.		 2 steps
4P /
L 100~500 R.P.M.
  
H 500~3000 R.P.M.
Infinitely variable
Carriage Length on bed / Width of carriage 400 mm (15.748") / 38 mm (15.118")
Cross slide travel 180 mm (7")
Top slide travel 100 mm (4")
Threads and Feeds Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.05~1.7 mm (0.002"~0.067")
Cross feeds 0.025~0.85 mm (0.001"~0.034")
Tailstock Quill diameter Ø50 mm (1.968")
Quill travel 112 mm (4.5")
Taper of center MT.No.3
Motor Main spindle 3HP 4P OPT.5 HP 2P/2.5HP 4P AC 2.2kW (3HP), Inverter
Coolant pump 1/8HP

Conventional Lathe

Metalworking

Conventional Lathe

Recently Viewed