ML Series (435/508MM)

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.
Conventional Lathe
  ML-1740  ML-2040  ML-1740V  ML-2040V 
ML-1760 ML-2060 ML-1760V ML-2060V
Capacity Height of centers 216 mm (8.5") 254 mm (10") 216 mm (8.5") 254 mm (10")
Swing over bed Ø435 mm (17") Ø508 mm (20") Ø435 mm (17") Ø508 mm (20")
Swing in gap Ø622 mm (24.48") Ø698 mm (27.48") Ø622 mm (24.48") Ø698 mm (27.48")
Swing over cross slide Ø277 mm (10.9") Ø353 mm (13.89") Ø277 mm (10.9") Ø353 mm (13.89")
Distance between centers 1000 mm (40") 1500 mm (60") 1000 mm (40") 1500 mm (60") 1000 mm (40") 1500 mm (60") 1000 mm (40") 1500 mm (60")
Width of bed 305 mm (12")
Gap width in front of faceplate 195 mm (7.67")
Headstock and
Main Spindle
Spindle nose, internal taper D1-6, Ø85 mm Taper 1/19.18
Spindle center sleeve Ø85 mm Taper 1/19.18 x MT. No.5
Spindle bore Ø80 mm (3.149")
Spindle speed: Gear steps
/
Range
12 steps / 36~1800 R.P.M.
A 36 50 70 105
B 130 180 250 380
C 620 900 1200 1800
3 steps /
L 30~125 R.P.M.
M 125~450 R.P.M.
H 450~2200 R.P.M.
Infinitely variable
Carriage Length on bed / Width of carriage 440 mm (17.32") / 477 mm (18.77")
Cross slide travel 235 mm (9.25") 272 mm (10.7") 235 mm (9.25") 272 mm (10.7")
Top slide travel 160 mm (6.3")
Threads and Feeds Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter Ø59 mm (2.322")
Quill travel 127 mm (5")
Taper of center MT.No.4
Motor Main spindle 7.5HP AC 5.5kW (7.5HP), lnverter
Forced lubrication for HD. -- 1/4HP
Coolant pump 1/8HP

Conventional Lathe

Metalworking

Conventional Lathe

Recently Viewed